VID · Video tools

Graduated ND Video Filter

Shareable link

Settings are written to the URL as you change them. Nothing differs from the defaults yet.

A graduated ND is the filter a landscape shooter slides in front of the lens to hold back a bright sky. Half dark, half clear, with a transition between them. This runs the same thing on every frame of a clip, in linear light, so one stop halves the light the way the glass does.

The line

Line is where the filter’s edge crosses the frame, as a share of the height from the top, and Angle turns it: 0° darkens the top, ±180° the bottom, ±90° a side. Transition is the width of the band from hard to soft; a hard grad crosses in a few percent of the frame, a soft one over most of it. Strength is in stops, from a trace to five, and a 0.9 ND is three.

Standard is dark on the covered side and clear on the other. Reverse is darkest along the line and clears toward the covered edge, the sunset filter: the sun sits at the horizon and the sky above it is already darker.

Follow tilt

A tilt moves the horizon through the frame at a steady rate, so the line does the same. Follow tilt is that rate, in percent of the frame height per second, down for positive values and up for negative. Play the preview and set the rate that keeps the line where the horizon is; the line may leave the frame, which is the grad fully in or fully out. Frame zero is the still version, so Line sets where the edge starts.

Colour

Neutral takes stops and nothing else. Warm is an 81-series tint, Blue, Sunset orange and Tobacco follow the filters sold. Each tints in proportion to the stops a point receives, so the clear side stays untinted and the soft band shades into it.

Where it stops

The filter cannot put back what the camera clipped, and it does not know where the horizon is. A clip with the sky and land exposed apart by three stops gains the same three stops back; a clip where the sky is pure white gains a grey ceiling.

Frequently Asked Questions

It darkens one side of every frame by a number of stops in linear light, which is how the glass does it, across a transition band you set from hard to soft, with the line placed and angled anywhere. A reverse grad is darkest along the line and clears toward the edge, for a sun on the horizon. The colour grads tint in proportion to the stops.

It moves the line down the frame, or up for negative values, at a steady rate in percent of the height per second. A tilt moves the horizon at a steady rate, so set the rate that keeps the line on the horizon while the preview plays. Zero holds the line still, which is right for a locked-off shot.

No. Nothing in the clip is analysed for motion, and a filter that followed the frame on its own would need to read the whole shot first. Follow tilt covers the common case, a slow steady tilt; a handheld shot or a pan with a sloping horizon is a job for a tracker in an editor.

No. A clipped sky is a wall of white before the filter, so it comes down as flat grey. The real filter goes in front of the lens before the clip happens. On a sky that still has detail it does the same job as the glass.

It is copied into the export unchanged when the container can hold its codec, and re-encoded when it cannot. A note under the export button says which happened.

Explore Our Tools

Browse all tools