A graduated neutral density filter is a sheet of glass that is dark at one end, clear at the other, and slid in front of the lens until the dark half covers the sky. It holds the sky back by a known number of stops while the land is exposed normally. The effect is the same operation on a file: the light is divided, in linear light, by two to the power of the stops, with the division fading out across a transition band.
Strength in stops
One stop halves the light; two stops quarter it; three stops, the 0.9 ND of a filter catalogue, leave an eighth. Because the division is done in linear light and not on the gamma-encoded bytes, a sky two stops down keeps its tonal relationships. A dark cloud and a bright cloud stay two stops apart. Darkening the bytes directly would have crushed the shadows of the sky faster than its highlights.
Line, angle and transition
Line is where the filter’s edge crosses the frame, from the top. Angle rotates the filter around that point: 0° darkens the top, ±180° the bottom, and ±90° a side. Transition is the width of the band from fully dark to clear, from a hard grad of a few percent of the frame to a soft one that spans most of it.
A hard edge belongs on a horizon nothing crosses, usually the sea. Where buildings, trees or a mountain cross the line, a soft transition spreads the change so thinly that the objects crossing it do not show a band.
Standard and reverse
A standard grad is darkest at its far edge and clears toward the line. A reverse grad is darkest along the line and lightens toward the far edge, a shape made for sunsets, where the brightest band in the sky is at the horizon and the sky overhead is already darker than the sun’s glow.
Colour
Neutral is the plain filter. The others reproduce the colour grads that are sold: Warm is an 81-series amber, Blue a cool sky, Sunset an orange for a horizon glow, Tobacco a brown that pulls a bright sky toward storm light. The tint is applied in proportion to the stops at each point, so the clear half stays neutral and the transition band takes only part of it.
Example: a landscape with a pale sky
Put the line on the horizon, leave Standard selected, and set Transition to around 50 if trees or hills cross the horizon. Start at two stops. If the sky goes grey rather than blue, it was clipped in the file and no amount of filter will put cloud into it.
Where it stops
Clipped highlights contain no detail, so the filter darkens them to a flat tone. It is also a straight line: a sky bounded by a curved hill needs a mask, not a grad.