AUD · Audio tools

Another Room Audio Effect

Shareable link

Settings are written to the URL as you change them. Nothing differs from the defaults yet.

Oxyd To put the result on a track with other audio, Oxyd is a multitrack editor with the same effects. Open Oxyd

Hear a recording from somewhere it is not playing. The scene picks where you are standing, Wall sets how much comes through the partition, and Distance how far away the source is. The result is the music next door, the party downstairs, or the band heard from the street.

The wall

Sound through a wall loses its top end first and loses level everywhere. Wall moves the corner of a 24 dB per octave low-pass from about 4 kHz at 0, which is an open doorway, down to the low hundreds of hertz at 100, and takes up to 14 dB off the level with it. The exact range depends on the scene: a floor passes less than a wall, and the outdoor scenes let more through because there is less between you and the source.

Upstairs adds a resonance at the corner. A floor rings where a wall does not, which is why a bass line heard through a ceiling thumps rather than hums.

Distance

Distance does three things. The level falls as 1 / (1 + k × distance), with k set by the scene. The arrival is delayed, by up to 30 ms indoors and 160 ms for the far outdoor scene. And the air takes the top end down a one-pole slope whose corner falls with distance, from 16 kHz at zero to 2.2 kHz for a source far away outdoors.

The space you are in

The last stage is the room on the listener’s side. The next room and the hallway run a small reverb built from four combs and two allpasses, scaled to a modest room for the first and a long reflective corridor for the second. Upstairs uses a small, damped room, because a ceiling is closer than a wall.

The two outdoor scenes drop the room. Outside the venue adds one slap at 95 ms off the building opposite, dulled to 1.8 kHz. Far away adds a fainter, later one at 210 ms.

Scenes

Scene What it models
The next room A wall, a modest room on your side
Down the hall A wall, a long reflective corridor
Upstairs A floor with its resonance, a small damped room
Outside the venue A heavy wall, no room, one slap off a building
Far away outdoors Little in the way, heavy air loss, a distant slap

Changing the scene during playback glides the filters and bends the room’s reflections toward the new lengths over a fraction of a second rather than cutting between them.

Pairing it with other steps

The exported file is quieter than the source by design. The gain step brings it back up if the level matters. For a sound heard from under water rather than through a wall, the underwater effect uses the same idea with water in place of the partition.

Frequently Asked Questions

It puts a partition, a distance and a listening space between you and the recording. The wall is a steep low-pass with a level loss that both deepen as Wall goes up, the distance is a drop in level, a delay and a dulling from the air, and each scene adds the reflections of the space you are standing in: a room, a hallway, or a slap off a building outdoors. It reads WAV, MP3, M4A, AAC, Ogg, Opus, FLAC, AIFF and WebM audio.

A low-pass alone is a blanket over the speaker. The next-room sound also loses level, arrives late, and is heard inside a second space with its own reflections, and the three happen in that order. The filter page gives you the first part on its own if that is all you need.

Each scene is an archetype of where you are standing. The next room and the hallway add an indoor space of different sizes, upstairs adds the resonance a floor has where a wall does not, and the two outdoor scenes drop the room and add a single faint slap from a building opposite, with the air dulling the sound more the further it travels.

No. The scenes are archetypes with fixed reflection patterns, not measurements of any particular wall or room. To place a sound in a space you have recorded, the convolution reverb takes an impulse response of that space.

Because walls and distance lose level, up to 14 dB through the thickest wall and more again at full distance. That loss is part of the picture. Add the gain step afterwards if the file needs to come back up to its original level.

Explore Our Tools

Browse all tools