Turn a picture into a stencil with cut areas, material, and bridges, then download the sheet as PNG or each layer as PNG and SVG. The result is made for a knife or a cutting machine: shapes smaller than the blade can follow are dropped, and any piece that would fall out of the sheet is tied back to it.
From tones to cut areas
The picture is reduced to brightness, smoothed a little, and split by one to four thresholds. Pixels below the lowest threshold become cut area on every layer; pixels above the highest stay as material everywhere. The thresholds are set from the picture’s own tone groups rather than at fixed values, so a dark logo on white splits where the logo meets the paper, not somewhere inside the white.
Balance shifts all thresholds together. Drag toward Darker when the subject is losing its mid-tones to the sheet, toward Lighter when the cut area is swallowing the picture.
Detail and speck removal
Every cut shape and every piece of material is measured. Anything smaller than the minimum feature is filled with its surroundings: a cut speck becomes material, a material speck becomes cut. The minimum feature scales with the picture, and the Detail hint shows it in pixels at export size. At 50 it is about 1.5% of the long side, which keeps the eyes in a portrait and drops the noise in the hair.
Lower Detail also blurs the picture before the thresholds, which rounds off ragged edges. A stencil cut by hand wants Detail around 30 to 40. A cutting machine can take 70 or more.
Islands and bridges
A single-sheet stencil has a hard rule: every piece of material has to touch the rest of the sheet. The counter of a letter, the pupil of an eye, and a highlight inside a dark shape all break it. Those pieces are islands, and once the area around them is cut they drop out.
With Add bridges on, each island gets a bar of material along the shortest route through the cut area back to the sheet. The route follows the cut shape, so the bar is as short as it can be and crosses no other material. A ring that hides a second island inside it gets bridged first, then the inside is found and bridged in the next pass. Turn bridges off to see the islands hatched in the preview and place your own; that is the better choice for a face, where a bridge through the pupil reads as a highlight if you angle it yourself.
Example: a portrait at 2 layers
A head-and-shoulders photo with light from one side, cropped tight, Layers at 2, Detail at 45, Balance at +10. Layer 1 cuts everything in shadow and mid-tone, which is most of the face, the hair, and the far side of the neck. Layer 2 cuts only the deep shadows: the nostrils, the line of the mouth, the eye sockets, and the hair mass. Spray layer 1 in a mid grey, then layer 2 in black, and the face reads at arm’s length with two colours.
The preview shows the same thing in two tones of grey on paper. Bridges appear as paper bars across the cut area; in the example the whites of the eyes and the highlight on the lower lip each need one.
The files
Download PNG gives the preview at export size: paper material, one grey per layer, bridges included. Download layers (ZIP) gives the sheets:
layer-1.pngtolayer-4.png: black is cut, white is material, no transparency. Print at the size you need and cut by hand, or send to a machine that takes raster masks.layer-1.svgtolayer-4.svg: one path per sheet with holes in the same path, so a cutter traces each outline once. Scale the whole file to your sheet; the outlines stay sharp.
Export runs at the source size up to 2400 px on the long side. Larger photos are scaled down first, and the preview uses the same relative settings, so what you see is what the files contain.
Where it stops
The result is only as good as the contrast of the source. A photo with soft light and a cluttered background has no clear tone groups to split and comes out as blobs; crop to the subject and raise the contrast first. Bridges are placed by distance, not by what the picture shows, and a bar through a face is sometimes better moved by hand. Four layers is the limit; past that, a stencil stops being a stencil and becomes a print.