Machine embroidery builds a picture from areas of one thread colour, each filled with rows of parallel stitches. The effect draws that: it finds the colour areas, lays stitches into them, and shades each thread as a rounded, glossy strand.
Thread colours
The picture is reduced to between 3 and 24 colours, chosen from the image itself by clustering. Every part of the image takes the nearest of those colours, and specks smaller than about two threads are merged into what surrounds them, so an area is something a needle could fill.
Fewer colours give a design that looks like a patch or a badge. More colours follow a photo’s shading more closely and cost the bold shapes.
Stitch size
Stitch size sets the thread thickness against the picture, and the stitch length follows at seven thread widths. A small size reads as fine work seen from a distance. A large size reads as a close-up where single threads are visible. The size is a share of the image’s short side, so the full-size download has the same number of stitches as the preview.
Area borders step by whole threads. That is why a curve has a slightly toothed edge, as it does in real satin fill.
Stitch angle and sheen
Each thread colour is stitched at its own angle, 47° apart from the next, and Stitch angle rotates the whole set. Turning it changes which areas catch the light.
Sheen is the highlight on the crown of each thread. It is strongest on threads lying across the light, which comes from the top left, and weakest on threads pointing along it. At 0 the thread is matte, like cotton floss. Near 100 it is glossy, like rayon or polyester machine thread.
Relief
Dense stitching stands above the cloth. Relief shades the borders between areas: the edge facing the light is lifted and the edge facing away is darkened. With bare fabric on, the stitched areas also throw a shadow onto the cloth.
Bare fabric background
A logo on a plain background should not have its background stitched. Turn on the bare fabric option and the colour that owns most of the image border is drawn as a plain weave in that colour. The option looks at the border only, so a design that touches the edges of the image on all sides gives it nothing to find.
Example: a two-colour logo
Load a logo on a white background. Set Thread colours to 3, turn on the bare fabric option, and raise Stitch size until single threads are visible. Set Sheen near 70 and Relief near 60. The result is the logo as a stitched patch on white cloth, which is what a client approving an embroidered cap or polo wants to see before a sample is sewn.
Where it stops
Stitches run straight across each area. A digitiser would curve them around a shape, split a wide area into sections, and add a satin border; none of that is planned here. Text below about ten threads tall breaks up, as it does on real garments. Gradients become bands, one per thread colour.