Lighten a face, darken a sky, or pull attention toward one part of the frame by painting exposure onto the photo. Every stroke adds or removes light where the brush passes and nowhere else.
Dodge, burn and erase
Dodge raises exposure under the brush. Burn lowers it. Erase fades whatever has been painted under the brush back toward the original, for both tools and all three ranges at once.
The brush is soft: full effect at the centre, none at the edge. Overlapping strokes blend without a visible seam, which is what makes it suited to faces and skies.
Range
Each stroke is painted for one tonal range.
- Midtones changes the middle of the tonal scale and leaves pure black and pure white where they are. It is the general-purpose choice and the default.
- Shadows changes dark pixels. Dodge with it to open up a dark jacket or the shadow side of a face without touching the bright background behind it.
- Highlights changes bright pixels. Burn with it to bring back a pale sky or tone down a shiny forehead.
The range is decided per pixel from the photo’s own brightness, so a Shadows stroke over a dark branch against a bright sky changes the branch and not the sky, even though the brush covers both.
Brush size and exposure
Brush size is the diameter as a share of the short side of the image, and the rail shows the size in pixels for the loaded file. Use a brush larger than the area for broad shaping, and a small one for an eye or a highlight.
Exposure is the change per pass at the centre of the brush, in stops. One stop doubles or halves the light. Retouchers work low and build up: 10 to 30 over several passes gives a result that does not look painted. A pass lays down the same exposure whether the pointer moves fast or slowly. Holding the brush still keeps adding, like an airbrush.
Undo, reset and compare
Undo removes the last stroke and rebuilds the picture from the ones before it. Reset removes them all. The Show before switch in the corner of the preview shows the file as loaded; switch it off to see your work again.
Strokes belong to the loaded file. They are not stored in the page address, and loading another file starts clean. The tool, range, brush size and exposure are kept in the address.
Example: a portrait in flat light
Load a portrait shot on an overcast day. With Dodge on Midtones at 20, make two passes down the centre of the forehead, the bridge of the nose, the cheekbones and the chin. Switch to Burn on Midtones and make two passes under the cheekbones, along the jaw and at the temples. The face gains shape that the flat light did not give it. Check with Show before; if the change is obvious at a glance, erase some of it.
Limits
Nothing in the picture is detected. There is no face, sky or subject selection, and no edge-aware brush: the range setting is the only thing that keeps a stroke off neighbouring tones. An area clipped to white or black has no detail to recover, so burning a blown sky gives flat grey. The painted exposure is stored at up to 1024 pixels on the long side, which is finer than the soft brush can paint.